Focusing on Measuring, Monitoring and Control of Current, Voltage

Power and Energy

Hall Current Sensor,GS-A6 Series

Hall Current Sensor,GS-A6 Series

Input Range
50A 100A 200A 300A 400A
Power Supply
± 12V 、± 15V (± 5% )
4V , 5V
39x32.5x11.5mm,window diameter16mm
    GS-A6 Series is a hall current sensor that detects  AC or DC current in a wire, and generates a signal  proportional to that current. The generated signal can be then used to display the measured current in an ammeter, or can be stored for further analysis in a data acquisition system, or can be used for the purpose of control.


Type GS50-A6 GS100-A6 GS200-A6 GS300-A6 GS400-A6
Rated Current 50A 100A 200A 300A 400A
Linear Range 1.5 times of the maximum of measuring range
Output Voltage 4V 、 5V
Accuracy ±1%
Offset Voltage <± 25mV
Hysteresis Error <± 15mV
Temperature drift 0.05%/ ℃ 0.03%/ ℃ 0.025%/ ℃
Response Time < 7μS di/dt=50A/μS
Power Supply ± 12V 、± 15V (± 5% )
Current Consumption 18mA
Isolation 3KV AC 50Hz/min
Operating Temperature Range -10 ℃ ~ +80 ℃
Storage Temperature Range -25 ℃ ~ +85 ℃


                    1. Designed for measuring DC, AC, or  pulse Current, and measuring range is customizable.
                    2. Highly electrically isolated between input and output;
                    3. Unipolar or Bipolar measuring.
                    4. Current hole-thru inputing and low loss.
                    5. Compact design and light weight.
                    6. The case meets the standard 


Terminal Wiring:  1、+15V,    2、-15V ,     3、Vout ,      4、0V  ,   5. NC (No Connect).


Online message