Focusing on Measuring, Monitoring and Control of Current, Voltage

Power and Energy

3-Phase 4-wire AC Power Transducer Model:GS-Ax4B1-xxDS5

3-Phase 4-wire AC Power Transducer Model:GS-Ax4B1-xxDS5

Model
GS-Ax4B1-xxDS5
Input Range
Voltage:AC 20~500V;Current:AC 30~200A
Power Supply
DC 12V15V24V;
Output
DC 0-5V、0-10V、1-5V、0-20mA、4-20mA、2.5±2.5V、3±2V、10±10mA、 12±8mA
Mounting
35mm DIN Rail
Size
86(L)x70(W)x53mm(H)Hole diameter:11mm
3-Phase 4-wire AC Power Transducer Model:GS-Ax4B1-xxDS5 

Overview

         AP4B1 or AQ4B1 series is an electrically-isolated 3-phase  4-wire AC power transducer.It can measure the active power and reactive power simultaneously and generate signals such as 0-5V,1-5V,0-20mA,4-20mA etc.  Processing by the advanced MCU and precisive 24-digit AD Converter, this transducer has the advantages of high precision and superior performance; It can be widely used in electricity, communications, railways, industrial control and many other fields.


Specifications:

* Accuracy:Class 0.5
* Power Supply:12V-24Vdc(Optional)
* Frequency:40~75Hz
* Input:Voltage:AC 20~500V;Current:AC 30~200A(Customizeable)
* Voltage Resistance:≥1KΩ*V
* Output:DC 0-5V、0-10V、1-5V、0-20mA、4-20mA、2.5±2.5V、3±2V、10±10mA、
    12±8mA(Optional)
 *Operating Temperature:-10℃~+60℃
* Load Capacity:Voltage output≥2KΩ;Current output≤250Ω
* Rated Power Consumption:≤1W
 *Load of Isolation Voltage:DC 2500V
* Response Time:≤300ms
 *Thermal Drift:≤300PPm/℃
* Lightning Surge Immunity:Power-suply end 2000V,Input end 2000V, Output end 500V
 *Case Style:DS5
 *Case Material:ABS (flame retardant)
* Mounting:35mm DIN rail or Screw.



Part Number Guide:
CO   Product Type Input type Phase Isolation Waveform   Output Power supply Case Style
GS  A  AC  P
Active Power
 
 4
3-Phase
4-
Wire
B 2 isolation 1 Sine  
 
A 0-5V 2
 
 
 
4
 12Vdc
 
 
 
24Vdc
DS5  DS5
B 0-10V
C 0-20mA
D 4-20mA
 Q  
Reactive power
I 2.5±2.5V
N 3±2V
L 10±10mA
K 12±8mA
Note:In the main mode GS-Ax3B1-x6EC,xx means “input type” and “output” signals.


Wiring Diagram:
          
Note: Current hole-thru input; Terminals 1,2,3,and 4 are for voltage input; Terminal 7 and 8 are for power supply; Terminals 10,11,12,and 13 are for signal output; Terminals 5,6,14,15,and 16 are empty terminals.

Linear Diagram of Input and Output:
  








 

Online message