Focusing on Measuring, Monitoring and Control of Current, Voltage

Power and Energy

Single Phase Frequency Transducer  GS-AF1B1-xxMC

Single Phase Frequency Transducer GS-AF1B1-xxMC

Model
GS-AF1B1-xxMC
Input Range
Frequency:0-10KHz Voltage:AC 5V~1000V
Power Supply
DC 12V 15V 24V; AC/DC 85-265V
Output
DC 0-5V、0-10V、0-20mA、4-20mA
Mounting
DIN Rail/Screw
Size
116x25x87mm
Single Phase Frequency Transducer Model GS-FB-xxMC

GS-AF1B1 series is signle phase the frequency transducer. It adopts the principle of photoelectric isolation, and can convert the input frequency signal into standard linear signals of 0 ~ 5V, 0-10V,0 ~ 20mA, 4 ~ 20mA and other standard signals for output. the input frequency signal can be a sine wave, square wave and zero-crossing wave, and its amplitude can up to 1000Vpp. This product is two isolation, that is the input and output are isolated from the power supply. Easy installation, can be widely used in communications, electricity, railways, industrial control and other fields.

Specifications:

* Accuracy:Class 0.5

* Input range: frequency: 0-50Hz~10KHZ, Amplitude: 0-1000V;

* Output: 0-5V, 0-10V, 0-20mA, 4-20mA; 

* Power supply: DC 12V,15V,24V, AC/DC 85V~265V;         

* Load capacity: ≥2KΩ (voltage output); ≤300Ω (current output);

* Temperature drift: <500ppm/°C;

* Isolation voltage: DC 2500V

* Response time: ≤300 mS;

* Rated power consumption: <0.5W

* Output ripple: <10mV

* Surge Immunity: input port four-level 4KV (L-N / 2Ω / integrated wave), 

                              power supply / output port two-level 2KV (L-N / 40Ω / integrated wave);

* Impulse immunity:  input / power port ± 2KV, analog I / O port ± 1KV;

* Input overload capacity: continuous overload: 120%; short-term overload: 2 times of the rated         voltage input value , apply one second;

* Operating temperature: -10°C~+60°C;

* Storage conditions: -40°C~+70°C.

 

Part Number Guide:

  
Wiring diagrame:
               Wiring for power supply of 12V D ,15V DC,or 24V DC:
  
                Terminals 1 and 3 are for input;Terminals 8 and 12 are for output; Terminals 10 and 11 are for power                      supply;Terminals 2, 4, 5, 6, 7, 8 and 9 are NC (No Connection); 




 

Online message